Metal roofing prices in Concord typically range from $5.50 to $20 per square foot for installation, while repairs start around $450, depending on the material, roof complexity, and scope of work. Factors like roof size, pitch, accessibility, and whether you choose standing seam, corrugated panels, or stone-coated steel all influence the final cost. We believe in transparent pricing so you can plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Concord and the Diablo Valley: panel systems engineered for hot dry summers, intense UV, delta wind gusts and winter rain, installed over high-temperature underlayment with proper attic ventilation and detailed flashing for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Concord homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as valley heat expands and contracts the roof every day. Strong wind resistance, a cool reflective finish and a noncombustible surface when embers blow in. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked composition shingle, cracked concrete tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for fire-resistant or impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing composition shingles, with no tear-off, less waste and lower cost. Popular on the single-story tract ranches that fill Concord. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing panels bent by fallen oak limbs or wind, resealing seams and penetrations, and fixing failed flashing before winter rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs, with leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and skylight transitions) and fixed right, not just caulked over. Emergency tarping available during winter storms. |
| Screw Replacement & Re-Fastening | From $750 | Concord's hot days and cool nights expand and contract metal roofs constantly, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for patio covers, garages, workshops, barns and carports across Contra Costa County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust and rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of slate, shake or architectural shingles with the lifespan of steel, a favorite for Concord homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for fall gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish, with excellent wind performance, a fire-resistant surface for homes near the hills, and profiles that mimic the Spanish clay tile and shake looks common on Concord homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in dry valley air. Custom fabrication for the fine details older Concord homes call for. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys and stucco transitions, the number one leak point on Concord roofs when the first fall storms arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift edge fastening, ridge and eave closures and ember-resistant details for metal roofs, important where Diablo winds and gusts off the hills, and wildfire embers, reach homes near Mount Diablo. Honest guidance on whether yours needs them; Concord gets no real snow. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, fallen-limb and winter storm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, ember-vulnerable gaps and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden winter downpours away from stucco walls and foundations, with details that handle oak leaves and dry-season dust. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Contra Costa County, from Clayton ranch outbuildings to Concord industrial units and Pacheco shops, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, while complex designs with multiple valleys, hips, and penetrations increase installation time and cost.
- Material choice : Standing seam and copper are premium options, while corrugated panels and retrofits over shingles are more budget-friendly. Your choice directly affects the per-square-foot price.
- Accessibility and roof pitch : Steep roofs or limited access (e.g., tight spaces, tall buildings) require additional safety measures and labor, which can raise the price.
- Repairs vs. new installation : Minor repairs like leak fixes start at $450, while full replacements or installations are priced per square foot. The extent of damage or need for tear-off also impacts cost.
What's included
- Travel included across the Concord area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions, material preference, and any known issues ready before calling. A Concord Metal Roofing estimator will inspect your roof, discuss options, and provide a detailed quote including materials, labor, and cleanup. Call (925) 445-3405 to schedule your free estimate.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type (e.g., corrugated steel vs. copper), roof complexity, accessibility, and whether you need installation, replacement, or repair. Labor costs and local market conditions also play a role.
Do you offer free estimates?
Yes, we provide free estimates for metal roof inspections and storm damage assessments. Call (925) 445-3405 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; ask your estimator for details.