Serving the Concord area  ·  (925) 445-3405  ·  Open Mon-Sun 7am-7pm
📞 (925) 445-3405 Free Quote

Metal Roofing in Walnut Creek, CA (94596) · Local Professionals

Concord Metal Roofing · Fast response in Walnut Creek and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (925) 445-3405
+350Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Walnut Creek is a city of mid-century ranches, hillside view homes, and downtown condos, all baking under the same hot Contra Costa sun. From the flat streets near Civic Park to the oak-studded slopes off Ygnacio Valley Road, roofs here take a beating from intense UV, gusty delta winds, and the occasional ember drift from the hills.

That is why homeowners in 94596 call Concord Metal Roofing. We know the low-pitched ranch roofs near downtown and the steep, complex roofs up in the hills, and we install metal systems that reflect heat and hold up to whatever the Diablo winds bring.

Metal Roofing in Walnut Creek (94596)

Walnut Creek sits at the edge of the Diablo Valley floor, with older single-story ranches on tight lots near downtown and larger two-story homes climbing the foothills toward Mount Diablo. The flat ground near the Iron Horse Trail drains slowly after winter rains, so we pay close attention to flashing and gutter pitch on low-slope roofs. Up on the hills, steep grades and narrow driveways mean we plan staging and material delivery carefully, often using smaller lifts or hand-carrying panels to avoid damaging landscaping. The intense summer sun and fall wildfire embers make standing seam and stone-coated steel popular choices here, and we size ventilation and underlayment for the heat, not just the rain.

Our team has worked across Walnut Creek and the surrounding Concord area for years, and we understand how local building inspectors and HOA design committees review roofing projects. We handle the paperwork and coordinate inspections so you are not chasing signatures.

Our services in Walnut Creek

How a Job Works in Walnut Creek

Step 1: Call us at (925) 445-3405 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, check flashing and fasteners, and talk through metal options that fit your home and budget. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit and coordinate with your HOA if needed. On tight lots near downtown or steep hillside driveways, we plan delivery and staging to keep access clear. We remove the old roof, inspect and repair the deck, then install your new metal roof with manufacturer-approved underlayment and flashing. Most residential roofs take a few days to a week depending on size and complexity.

Step 3: We clean the site daily, magnet-sweep for nails, and haul away all debris. At the final walkthrough we show you the completed work, explain maintenance, and make sure you are satisfied before we consider the job done.

Pricing in Walnut Creek depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7 per square foot, and standing seam metal roofing around $10 per square foot. Stone-coated steel and metal shingle systems start around $9 per square foot, while copper and specialty metals start around $20 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Steep hillside lots, complex rooflines, and emergency scheduling can affect the final number. Call (925) 445-3405 for a free, no-pressure estimate tailored to your Walnut Creek home.

My ranch home near Civic Park has a low-pitch roof that pools water near the chimney. Can metal roofing fix that?
Yes. Low-slope roofs are common in Walnut Creek's older neighborhoods, and standing seam metal with proper slope and flashing details handles ponding better than aging shingles. We inspect the deck and drainage first, then recommend a panel profile and underlayment that shed water reliably in our winter rains.
A windstorm just lifted some panels on my roof in Walnut Creek. How fast can you respond?
We prioritize storm and wind damage calls in Walnut Creek and the surrounding area. Call (925) 445-3405 and we will schedule an inspection, often same or next day when demand allows. We secure the roof to prevent further water intrusion, document the damage for your insurance claim, and provide a repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot home in 94596?
For a home that size, a basic corrugated panel roof might run roughly $8,000 to $12,000 installed, while standing seam could be $15,000 to $20,000 or more. Access, roof complexity, and whether we remove the old roof or retrofit over it all affect the price. We give you a firm written estimate after a free inspection.
Do I need a permit to replace my roof in Walnut Creek?
Yes, most full roof replacements and re-roofs require a permit from the city. Requirements and fees vary, so we confirm the current rules with the City of Walnut Creek before starting and handle the permit application and inspections for you. You can also check basic information at https://www.walnut-creek.org/.
My HOA requires a specific roof color. Can you help with approval and installation?
We work with Walnut Creek HOAs regularly and can provide product samples, color chips, and manufacturer specs for the architectural review. We also respect property line setbacks and coordinate with neighbors if staging or access crosses a boundary. Just share your HOA guidelines and we will build the submittal package.
Are you fully insured for roofing work at my Walnut Creek property?
Yes. Concord Metal Roofing carries general liability insurance and workers' compensation coverage for every crew member.
What maintenance does a metal roof need in Walnut Creek's hot, dry climate?
Metal roofs are low maintenance, but we recommend an annual inspection to check fasteners, flashing, and sealant, especially after fall wind events. Keep gutters clear of oak leaves and debris, and wash the roof occasionally to remove dust and pollen. In wildfire-prone areas, keeping the roof and gutters clean of ember-catching debris is especially important.

Nearby service areas

📍 Concord 94520📍 Pleasant Hill 94523📍 Martinez 94553📍 Clayton 94521
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

350+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 350 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Pittsburg

“Had them put up a metal roof on our equipment hangar out in the rural part of town. It's a big span, around 3,000 square feet, and they knocked it out in under a week with a crew of four. Straight lines, tight panels, no drama.”

Commercial Metal Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Walnut Creek

“We wanted a real copper awning over the back patio and these guys delivered. The soldering on the seams is beautiful, you can tell they actually know copper, not just steel panels. Worth every penny.”

Copper & Specialty Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Clayton

“Our old farm barn roof was rusted through in spots and I figured we'd have to tear the whole thing off. They replaced the failing panels, re-fastened everything and got it watertight again. Two days, fair price, and they hauled away all the old metal.”

Metal Roof Replacement
Jennifer M.
⭐⭐⭐⭐
JM
Jennifer M.
Concord

“Just had a new standing seam roof installed on our house and it looks incredible. The crew was respectful, cleaned up every scrap of metal each night, and finished a day ahead of schedule. Only gripe is they showed up a little later than promised on day one, but the work itself is flawless.”

Standing Seam Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Pleasant Hill

“We had a leak right where the vent pipe comes through the roof and it was dripping into the hallway every time it rained. They found it fast, fixed the flashing and sealed it up. No more drips, and they didn't try to sell me a whole new roof.”

Metal Roof Leak Repair
David L.
⭐⭐⭐⭐⭐
DL
David L.
Martinez

“Brand new metal roof on our place and I'm honestly surprised how quiet it is, I expected a drum every time it rained. They used stone-coated steel panels and the color matches the house perfectly. Crew of three, done in four days.”

Metal Roof Installation
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Danville

“Didn't want the mess of a full tear-off, so we went with the retrofit over our old shingles. They handled all the furring strips and flashing and the new metal roof has been solid through two windstorms already. Really glad we went this route.”

Metal Roof Over Shingles (Retrofit)
Lisa H.
⭐⭐⭐⭐
LH
Lisa H.
Antioch

“Full replacement on our 1970s ranch house. The old corrugated panels were shot and they swapped them for new ribbed panels with proper snow guards. Took about a week, and the only hiccup was some back-and-forth on the final invoice, but the roof itself is great.”

Metal Roof Replacement
Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (925) 445-3405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm