Serving the Concord area  ·  (925) 445-3405  ·  Open Mon-Sun 7am-7pm
📞 (925) 445-3405 Free Quote

Metal Roofing in Moraga, CA (94575) · Local Professionals

Concord Metal Roofing · Fast response in Moraga and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (925) 445-3405
+350Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Moraga's rolling hills and oak-studded canyons are lined with 1960s and 70s ranch homes and newer hillside custom builds, many tucked into narrow, sloped lots off Moraga Road and Canyon Road. If your roof is original composition shingle or aging concrete tile, the intense summer sun and fall Diablo winds have likely taken a toll.

Homeowners in 94575 call Concord Metal Roofing because we understand the specific challenges here: tight driveway access, steep grades, and the need for roofing that reflects heat and resists wind-driven embers. From the Moraga Country Club to the trails around Rancho Laguna Park, we've worked on homes that face the same conditions yours does.

Metal Roofing in Moraga (94575)

Moraga's terrain is defined by its hills and canyons, with many homes built on slopes that require careful staging and fall protection. The soil is often clay-heavy, which can shift with seasonal moisture and affect roof alignment over time. Older ranches often have low-pitch roofs that are ideal for standing seam or corrugated panels, while hillside homes may need custom flashing to handle complex rooflines and skylights. The area's oak woodlands mean falling limbs and debris are common, so we always inspect for punctures and fastener wear. We also account for the Diablo winds that funnel through the Moraga Valley in fall, specifying panels and fasteners rated for high wind uplift.

Our team has been serving Moraga and the surrounding Contra Costa County communities for years, and we know the local building department's requirements for permits and inspections. Whether you're near Saint Mary's College or off Rheem Boulevard, we bring the same attention to detail and quality craftsmanship.

Our services in Moraga

How a Job Works in Moraga

Step 1: Call us at (925) 445-3405 or request a free estimate online. We'll schedule an on-site assessment at your convenience, inspect your current roof, discuss your options, and provide a detailed written estimate. We'll also help you understand permit requirements with the Town of Moraga.

Step 2: Once you approve the estimate, we'll pull the necessary permits and schedule your project. For hillside homes, we plan for material delivery and staging carefully, often using smaller trucks or conveyors to navigate narrow, steep driveways. If your home is in an HOA, we'll coordinate color and profile approvals before ordering materials.

Step 3: After installation, we clean the site thoroughly, remove all debris, and walk you through the finished roof. We don't consider the job done until you're satisfied and your property is spotless.

Metal roofing in Moraga typically ranges from $8 to $20 per square foot installed, depending on the material and complexity. For example, corrugated panel roofing starts at $5.50 per square foot, standing seam at $10, and copper or specialty metals at $20. A typical ranch home might need a metal roof replacement starting around $9 per square foot, while repairs like leak fixes start at $450. Factors that affect cost include roof size, pitch, access (hillside homes may require extra equipment), the condition of the existing roof, and whether you need a full replacement or a retrofit over shingles. We provide free estimates and transparent pricing, so call (925) 445-3405 to get started.

My Moraga home is on a steep hillside with narrow driveway access. Can you still install a metal roof?
Yes, we regularly work on hillside properties in Moraga. We assess access during the estimate and plan for material delivery using smaller trucks, conveyors, or cranes if needed. Safety and efficiency are our priorities, and we'll explain the logistics before starting.
How quickly can you respond to storm damage or a leaking roof in Moraga?
We offer emergency storm and wind damage repair with free inspections. Call us at (925) 445-3405, and we'll schedule a prompt visit to assess the damage and provide temporary or permanent repairs. Response time depends on demand, but we prioritize active leaks.
What's the typical cost for a metal roof replacement on a 1960s ranch in Moraga?
For a standard ranch home, metal roof replacement starts around $9 per square foot, but the total depends on roof size, pitch, and material choice. A 2,000-square-foot roof might range from $18,000 to $30,000. We provide a detailed estimate after inspecting your property.
Do I need a permit for a metal roof in Moraga, and can you help with the process?
Yes, the Town of Moraga requires permits for roof replacements, and requirements vary. We handle the permit application and coordinate inspections, ensuring your project meets local codes. We'll guide you through any HOA or historic district reviews if applicable.
My HOA has strict design rules. Can you help get approval for a metal roof?
Absolutely. We provide material samples, color chips, and specifications to submit to your HOA. We'll coordinate with them to ensure the panel profile and color meet their guidelines, and we won't order materials until approval is confirmed.
Are you fully insured for roofing work in Moraga?
Yes, Concord Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I inspect my metal roof in Moraga, and what should I look for?
We recommend an annual inspection, especially after fall winds and winter rains. Check for loose fasteners, debris accumulation in valleys, and signs of flashing wear. We offer free inspections and can perform routine maintenance like screw replacement to extend your roof's life.

Nearby service areas

📍 Concord 94520📍 Walnut Creek 94596📍 Pleasant Hill 94523📍 Martinez 94553
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

350+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 350 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Pittsburg

“Had them put up a metal roof on our equipment hangar out in the rural part of town. It's a big span, around 3,000 square feet, and they knocked it out in under a week with a crew of four. Straight lines, tight panels, no drama.”

Commercial Metal Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Walnut Creek

“We wanted a real copper awning over the back patio and these guys delivered. The soldering on the seams is beautiful, you can tell they actually know copper, not just steel panels. Worth every penny.”

Copper & Specialty Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Clayton

“Our old farm barn roof was rusted through in spots and I figured we'd have to tear the whole thing off. They replaced the failing panels, re-fastened everything and got it watertight again. Two days, fair price, and they hauled away all the old metal.”

Metal Roof Replacement
Jennifer M.
⭐⭐⭐⭐
JM
Jennifer M.
Concord

“Just had a new standing seam roof installed on our house and it looks incredible. The crew was respectful, cleaned up every scrap of metal each night, and finished a day ahead of schedule. Only gripe is they showed up a little later than promised on day one, but the work itself is flawless.”

Standing Seam Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Pleasant Hill

“We had a leak right where the vent pipe comes through the roof and it was dripping into the hallway every time it rained. They found it fast, fixed the flashing and sealed it up. No more drips, and they didn't try to sell me a whole new roof.”

Metal Roof Leak Repair
David L.
⭐⭐⭐⭐⭐
DL
David L.
Martinez

“Brand new metal roof on our place and I'm honestly surprised how quiet it is, I expected a drum every time it rained. They used stone-coated steel panels and the color matches the house perfectly. Crew of three, done in four days.”

Metal Roof Installation
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Danville

“Didn't want the mess of a full tear-off, so we went with the retrofit over our old shingles. They handled all the furring strips and flashing and the new metal roof has been solid through two windstorms already. Really glad we went this route.”

Metal Roof Over Shingles (Retrofit)
Lisa H.
⭐⭐⭐⭐
LH
Lisa H.
Antioch

“Full replacement on our 1970s ranch house. The old corrugated panels were shot and they swapped them for new ribbed panels with proper snow guards. Took about a week, and the only hiccup was some back-and-forth on the final invoice, but the roof itself is great.”

Metal Roof Replacement
Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (925) 445-3405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm