Serving the Concord area  ·  (925) 445-3405  ·  Open Mon-Sun 7am-7pm
📞 (925) 445-3405 Free Quote

Metal Roofing in San Ramon, CA (94582) · Local Professionals

Concord Metal Roofing · Fast response in San Ramon and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+350Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

San Ramon's 1980s to 2000s two-story subdivisions are hitting the 30-year mark on their original composition roofs, and a lot of homeowners in 94582 are weighing replacement right now. From the tight cul-de-sacs off Bollinger Canyon Road to the larger tile-roofed homes climbing toward the open space, the housing stock here is due.

We're Concord Metal Roofing, based just up the road in Concord, and San Ramon is one of our regular service areas. If you've noticed granules in the gutters or a ceiling stain after the first fall rain, we can take a look and tell you straight whether it's a repair or time to replace. Call (925) 445-3405.

Metal Roofing in San Ramon (94582)

San Ramon sits in the San Ramon Valley with the Diablo Range foothills rising to the west, and that setting shapes the work. The older two-story subdivisions, places like the neighborhoods off Crow Canyon Road and around Central Park, were built with low-pitch roofs and tight side yards, so staging materials and getting a dumpster in can be the hardest part of the job. Farther up toward the ridgelines, homes sit on grade with oak-covered slopes behind them, and wind-driven rain and fall embers off the hills are the real concerns. Summer UV here is intense and the dry season is long, which is exactly the condition where a properly installed metal roof with a reflective finish earns its keep. We also see a lot of original concrete tile and aging composition shingles that are past their service life, and we help homeowners sort out whether a retrofit over the existing deck makes sense or a full tear-off is the right call.

Our team has worked throughout Contra Costa County, and we know the local building departments, the inspection timelines, and the HOA review processes that come up in San Ramon. We're fully insured with general liability and workers' compensation, and we pull permits when the job requires it.

Our services in San Ramon

How a Job Works in San Ramon

Step 1: You call (925) 445-3405 or reach out through the site, and we set up a free on-site assessment. We look at the roof, the attic if accessible, the flashing, and the gutters, and we give you a written estimate with options. No pressure and no surprise line items.

Step 2: Once you approve, we schedule the work and handle the permit paperwork with the City of San Ramon. On tight lots we plan material delivery and staging ahead of time, and if your HOA requires design review for panel profile or color, we provide the product specs and color samples you need for the application. Most residential replacements run several days depending on size and complexity.

Step 3: We clean the site daily and do a final magnet sweep for nails, then walk the roof and gutters with you before we call it done. We leave your property clean and we don't consider the job finished until you've signed off.

Pricing in San Ramon depends on roof size, pitch, access, and how much prep the existing roof needs. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Stone-coated steel and metal shingle systems both start around $9 per square foot, and corrugated or ribbed panel roofing starts around $5.50. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight work around $600. Larger homes with complex rooflines or steep foothill lots will run higher, and urgency matters too. Call (925) 445-3405 for a free estimate specific to your roof.

My 1990s two-story in the Crow Canyon area still has the original composition shingles. Is a metal retrofit over them allowed in San Ramon?
Often yes, but it depends on how many layers are already on the roof and what the current code allows. San Ramon follows state and local rules that limit re-covering over existing shingles, so we check the layer count and deck condition first. If a tear-off is required, we tell you upfront rather than discovering it mid-job.
A windstorm peeled back panels on my roof near the foothills. How fast can you respond in San Ramon?
We prioritize active leaks and storm damage. Call (925) 445-3405 and describe what you're seeing. We can often get out for an inspection quickly, tarp or secure the area if needed, and give you a repair estimate. We also document damage with photos if you plan to file an insurance claim.
What does a typical metal roof replacement cost for a two-story San Ramon home?
Most two-story homes here fall in a range that starts around $9 per square foot for replacement, with standing seam and specialty systems running higher. The biggest factors are square footage, roof complexity, whether a tear-off is needed, and access. We give you a firm written number after the free assessment.
Do I need a permit to replace my roof in San Ramon?
Full replacements and re-roofs generally require a permit, and the City of San Ramon Building Division sets the fees and inspection requirements. We handle the permit application and coordinate inspections as part of the job. Rules can change, so we always confirm current requirements with the city before work starts.
My HOA wants approval before I change my roof color. Can you help with that?
Yes. Many San Ramon HOAs have design review requirements for roof profile and color. We provide product data sheets, color samples, and installation details you can submit with your application, and we can adjust the schedule to wait for approval so there's no pressure to start early.
Are you insured for work on my San Ramon property?
We are fully insured, carrying both general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in San Ramon's climate?
The main things are keeping gutters and valley areas clear of leaves and debris before the rainy season, checking fasteners and sealant on flashing every few years, and washing off dust and pollen so reflective finishes keep working. Fall is the best time to schedule an inspection, before the winter rains find any weak points.
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

350+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 350 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (925) 445-3405

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm